ESR900 Change log
Release Date Aug 15, 2013
|
Firmware version : 1.1.0.22 |
|
MD5 checksum : b5f730804ee5d164c7bff65207cd8fe5 |
WEB Version: 1.1.0
Fixed:
1. Fix user mode lower output power problem.
Release Date Aug 09, 2013
|
Firmware version : 1.1.0.21 |
|
MD5 checksum : 404e9695873385773c9281baf6f830ec |
WEB Version: 1.1.0
Changed:
1. 3 steps Wizard.
2. FTP remote access. (Do not support the Double NAT)
3. EnShare Web.
4. Double NAT Traversal.
Fixed:
1. Fix issue that When DMZ enable, remote host cannot access service portal and storage sharing page via port 80 and port 9000.
Release Date June 20, 2013
|
Firmware version : 1.0.1.26 |
|
MD5 checksum : d0fa3d7fb79134f165091da11e8b9849 |
WEB Version: 1.0.1
Changed:
1. Change Wireless LED behavior. (Same as ESR600)
2. Update App agent.
Fixed:
1. Fix HW-NAT cannot work issue. (DHCP/Static)
Release Date June 6, 2013
|
Firmware version : 1.0.0.21 |
|
MD5 checksum : 749d5556a5d14577c4be4a0a824eeaa4 |
WEB Version: 1.0.0
Changed:
1. The web title name fails.
Release Date May 24, 2013
|
Firmware version : 1.0.0.20 |
|
MD5 checksum : b4d15eaf4a1d6c40090494ff30d062a4 |
WEB Version: 1.0.0
Changed:
1. Change FW version from 0.0.6 to 1.0.0 for MP.
Release Date May 23, 2013
|
Firmware version : 0.0.6.18 |
|
MD5 checksum : 1cd2d4616a08ac1b34b3cee524690a67 |
WEB Version: 0.0.6
Changed:
1. Removed DFS Channel (Requested by PM). (SQA issue No.2)
2. Only supported WEP in SSID 1 (Requested by PM). (SQA issue No.6)
Fix issue:
1. Fix SQA issue that [Firewall][URL]Deny function fail when using IP filter.
2. Fix SQA issue that [Firewall][URL]Deny/Allow function fail when using MAC filter.
3. Fixed SQA issue that [IPv6][PPPoEv6]LAN DHCPs daemon can't enable when WAN type PD is disable in autoconfiguration mode.
4. Fixed SQA issue that [VPN] When GreenBow connect to device successfully, but can't access device webpage and can't ping device also.
5. Fixed SQA issue that [USB][File Server]Port can set 80 and 8080 that result user cannot access FTP by port 80/8080.
6. Fixed known issue L2TPoverIPSec/ IPSec Site to Site can’t work.
Release Date May 03, 2013
|
Firmware version : 0.0.5.12 |
|
MD5 checksum : 1a7404a7e07cb8347b17a13dea974df8 |
WEB Version : 0.0.5
Known issue:
1. L2TPoverIPSec can’t work.
2. IPSec Site to Site can’t work.
First Release
Default IP : 192.168.0.1
User Name : admin
Password : Base on user setting.